Smells Like Trouble
A gas collection well equipped with a dewatering pump requires regular attention lest a leachate eruption occur, resulting in a foul-smelling health hazard.
The Limits of Duct Tape
The hose bend at this GCCS wellhead is too tight, which led it to crack. The use of duct tape would suffice in an emergency, but it will eventually rot, resulting in loss of vacuum.
Unused sampling ports plugged with silicone or tape can eventually leak, or the plastic tubing can become brittle and snap off, all of which can result in false gas readings.
This flame arrester at a LFG flare fractured due to the lack of a vertical pipe support to relieve the 400 pounds of weight.
How's the Weather Up There?
This wellhead is too tall for safe access, which can lead to neglect. It should be rebuilt at waist-high level.
A Tired Formula
Tires originally installed to fend off rolling stock and ponded water ultimately make wellhead access difficult and unsafe, which can lead to neglect.
Sag and Seize
The gas system inlet pipe (left side of photo) at this GCCS sagged over time, which caused the blower impeller to seize, resulting in a costly repair.
Seeking a Seal
This corroded butterfly valve on the inlet pipe to a blower flare station cannot seal and is a hazard to maintenance work on the blower and flare.
High Water Muck
This gas condensate pumping station valve vault is flooded, rendering the shut-off valves inoperable.
Oil Can! Oil Can!
Rusted bolts make it difficult to access this gas collection wellhead and the outdated butterfly valve makes well tuning difficult.
Gas collection wellheads inside enclosures like this limit access and make it difficult for the technician to gather data. The confined space also presents breathing hazards.
All's Well That Ends Well
A properly maintained wellhead with slack in the hose to accommodate well settlement, a plastic gate valve for corrosion resistance and fine tuning of gas flow, and all monitoring ports under a protective cap.